High speed welding, low-distortion welding, Precision Welding,dissimilar metal welding has been achieved by Laser. |
Precise control of the laser made it possible to fine processing to the selected part. |
We have latest equipment and proprietary systems.It is possible to shorten delivery times. |
We support you to realize your desired quality of welding by proposing optimal laser processing head |
This is the introduction of laser processing and product samples. |
We are order made manufacturer of jigs and labor-saving machinery and steel structures. |
Only products that have passed a thorough inspection at each step are shipped from our factory. |
■"Labor-saving machinery" "robot" "Line System" design and fabrication |
CO2 laser weld bead 6.5mm |
Fiber laser weld bead 6.3mm penetration depth |
Welded bead by single mode fiber laser: aluminum 4.5mm |
Single mode fiber |
Welding copper with weaving |
Welding copper without weaving |
Laser arc hybrid welding SS400 sheet thickness 34mmt |
Laser arc hybrid welding |
Laser arc hybrid welding both sides16mm thickness |
Laser arc hybrid welding |
Laser arc hybrid welding |
Welding by the scanner with weaving |
Welding by the scanner with weaving |
Welding by the scanner with weaving |
Laser brazing Cu3%Si scan sonic ALO3 |
Welding by the scanner with weaving SUS304 |
Welding by the scanner with weaving |
Laser welding with hot wire |
Laser welding without wire |
Laser welding with hot wire |
Small Parts Welding |
Welding of copper terminal |
Welding copper and stainless steel |
Dissimilar metal welding of |
Dissimilar metals welding of copper and aluminum |
Remote welding of frames |
Butt weld of Aluminum |
Remote welded tailored |
Tailored blank jointed with five sheets |
Remote welding of aluminum |
Cu lap welding |
Welded titanium head face |
Micro Spot Welding |
High speed remote welding |
Welded Mesh |
Tungsten and stainless steel |
Enlargement |
Aluminum T-joint welding thickness=1.0mm |
Remote cutting by 2kWsingle mode fiber laser |
Non-oxidation cutting of copper mesh 0.3 thickness |
Precision sheet metal processing by laser cutting: cutting, bending, tapping |
Remote cutting of CFRP by 2kWsingle mode fiber laser |
Remote cutting of SUS304 by 2kWsingle mode fiber laser |
Cutting by 2kWsingle mode fiber laser |
Acrylic cutting 15mm thick |
Wood cutting 11mm thick |
Cardboard cutting 0.6mm |
Bakelite (mixed paper) cutting 10mm thick |
Duracon cutting 10mm thick |
Fine-cut stainless steel 8mm |
Fine-cut hot-rolled steel 8mm thick |
Stainless steel cutting 1.8mm thickness |
Slit of steel plate |
Acrylic cutting 25mm thick |
Remote cutting of aluminum |
Micro-hole processing |
Single Mode |
Pipe cutting |
Fine-cut stainless steel10mm |
Laser hardening on the |
Laser hardening on the |
▲ Enlargement |
Laser hardening treatment |
Gear hardening treatment by laser |
Stellite cladding processing |
Stellite cladding processing |
Stellite cladding processing |
Stellite cladding processing |
Stellite cladding processing |
Stellite cladding processing |
Multi-point high-speed |
Alloying: a non-magnetic |
|||
▲Enlargement |
▲Enlargement |
Laser plastic welding :PA66、PPS、PBT |
Weld of PBT |
Welding of PP and PBT |
Weld of PBT and SUS304 |
Weld of CFRP and SUS304 |